The times are developing and science and technology are advancing. Facing the rapidly changing new technology of dispensers, the maintenance personnel of dispensers are confused. The dispensers are really updated too fast. Facing the new type of dispensers, it is really true. I don't know how to start.
In fact, there are many ways to maintain the dispenser equipment, mainly based on the user's dispenser function. Generally, there are instructions for using the dispenser before purchasing the dispenser. Generally, users can directly follow these instructions for operation. When using the dispenser, it is necessary to pay attention to the total air pressure of the dispenser equipment needs to be kept within the standard range. This is the working condition of the dispenser, and any dispenser follows this rule.
Of course, if the company uses the dispenser for the first time, it should follow the manufacturer's instructions. Especially when replacing the glue of the dispenser, the pipe needs to be cleaned, and this step cannot be omitted. At this time, remember to close the feed valve and open the discharge valve. The operators of these operations must follow this operation, otherwise problems will occur.
Of course, the rest time of the machine must be guaranteed when in use. In the case of continuous production, it is necessary to cut off the power and rest for several hours. Of course, or keep the machine running once every two days to avoid the crystallization of the raw materials and the malfunction of the dispenser.
If the dispenser is not in use for a long time, the hose and bin of the dispenser should be cleaned first, and then the power supply must be unplugged immediately. This not only prolongs the service life of the machine, but also saves a lot of electricity costs. Tips for dispenser equipment.
Reminder: If you really don’t know how to start, or if you don’t understand it, it’s better not to start blindly. It is recommended to contact the after-sales maintenance personnel of the dispenser manufacturer.